National service telephone

0512-52672388

CN/EN
You Are Here:Home > Information dynamic
  1. [2025-05-12]

    Why is it said that formaldehyde free ENF grade environmentally friendly particleboard has low forma

    The low formaldehyde emission of ENF grade environmentally friendly particleboard is mainly due to a series of effective measures taken in raw material selection, production process, and quality testing, as follows: 1. Excellent raw materials Wood raw materials themselves have low formaldehyde content: Non formaldehyde ENF grade environmentally friendly particleboard usually uses high-qual

  2. [2025-05-05]

    Why is it said that moisture-proof green and environmentally friendly particleboard has a low water

    The low water absorption and expansion rate of moisture-proof green and environmentally friendly particleboard is mainly due to special measures taken in the production process, such as screening of raw materials, adding moisture-proof agents, and optimizing production processes. The specific measures are as follows: 1. Raw material selection and processing Excellent wood raw materials: W

  3. [2025-04-28]

    What is the surface smoothness of formaldehyde free ENF grade environmentally friendly particleboard

    The surface flatness of formaldehyde free ENF grade environmentally friendly particleboard is usually high, which is determined by its production process and equipment, as follows: 1. Excellent production process: During the production process, formaldehyde free ENF grade environmentally friendly particleboard undergoes multiple strict procedures, including screening, drying, gluing, paving, hot

  4. [2025-04-21]

    Why use odorless E0 grade environmentally friendly Particleboard in interior decoration

    The indoor decoration uses odorless E0 grade environmentally friendly particleboard, mainly because it has the advantages of environmental protection, good performance, convenient processing and high cost performance, as follows: 1. environmental protection and health Low formaldehyde emission: the E0 standard means that the formaldehyde emission of the plate is low, far lower than the no

  5. [2025-04-14]

    What is the hot press curing process of moisture-proof green Particleboard

    The hot pressing curing process of moisture-proof green particleboard is the key link in the production process. The following is its specific introduction: 1. preparation before hot pressing Slab inspection: check the slab after paving and preloading to ensure that its thickness is uniform, its surface is flat, and there is no obvious accumulation or vacancy of shavings. At the same time,

  6. [2025-04-07]

    What are the specific applications of ENF board is used in the field of interior decoration

    Formaldehyde free enf grade environmentally friendly particleboard is widely used in the field of interior decoration. The following are some specific aspects: 1. wall decoration Dado: it can be made into dado of various styles and colors and installed on the wall of living room, bedroom and other rooms. It can protect the wall and increase the beauty, and also has a certain effect of soun

  7. [2025-03-31]

    How to reflect the stability of tasteless E0 grade environmental Particleboard

    The stability of tasteless E0 grade environmental particleboard is mainly reflected in the following aspects: 1. structural uniformity: it is made of wood or other lignocellulosic materials after screening, drying and other pretreatment, applying adhesive and pressing through high temperature and high pressure. This production process makes the shavings in the particleboard evenly distributed, co

  8. [2025-03-24]

    How to embody the environmental protection of moisture-proof green Particleboard

    Moisture proof green particleboard reflects its environmental protection mainly through the following aspects: 1. environmental protection of raw materials Sustainable sources of timber: timber or wood fiber materials from sustainably managed forests are usually used. This kind of timber follows strict forestry management standards in the process of harvesting, ensuring the renewable natu

  9. [2025-03-17]

    Why do many people like ENF board is used

    Many people like ENF board is used, mainly for the following reasons: 1. Good environmental performance Low formaldehyde emission: ENF grade is currently the highest standard for formaldehyde emission from artificial boards in China, requiring formaldehyde emission not to exceed 0.025mg/m ³. Formaldehyde free ENF grade environmentally friendly particleboard uses formaldehyde free adhesive

  10. [2025-03-10]

    What are the advantages of odorless E0 grade environmentally friendly particleboard

    Odorless E0 grade environmentally friendly particleboard is a type of artificial board that has good environmental and usability performance, with the following advantages: 1. Good environmental performance Low formaldehyde emission: E0 level is currently the highest environmental protection standard for artificial boards in China, requiring formaldehyde emission to be ≤ 0.5mg/L. Odorless

+ wechat number:底部微信